Real-Time Prediction of Polymer-Coated Multiparticulate Dissolution using PAT

Process Analytical Technology, or “PAT” is the term given to analytical instruments developed to measure certain attributes of product within the manufacturing process, eliminating, or substantially minimising the need for sampling for off-line analysis. This approach has several key advantages over traditional off-line analysis methods and includes process measurements in situ with instant access to data which facilitates rapid decisions during product development and manufacture. While the time between sampling and off-line results may range from minutes to days depending on the test being performed and the analytical structures in place, many PAT systems are capable of real-time measurement results enabling control decisions to be made based not just on a process recipe, but also on the true critical quality attributes (CQAs) of the material at that point in time. This allows for a more dynamic process, compensating for variabilities such as raw material variations or mechanical wear in processing components, and supports compliance with newer QA initiatives such as continuous verification. Additionally, the automated nature of PAT allows for greater data generation with minimal operator time when compared to testing samples at-line or off-line.
Many PAT instruments exist on the market today supporting measurement of several physical and chemical Quality Attributes. One critical quality attribute (CQA), however which cannot be directly measured in-line due to the long duration of the analytical test is dissolution. Many new and pipeline oral dose medicinal products are formulated to enable modified or extended release of the active ingredient to increase patient compliance and improve convenience by reducing the number of daily doses required by the patient. Multi-step Fluid Bed (Wurster) Coating processes are routinely used to produce pellets or beads with the correct release profile during formulation. Accurate and rapid measurement of dissolution performance is essential to production quality control, and to efficient process development. It can take several days or weeks before dissolution test results are available. The potential to significantly reduce product development and production cycle times is high for a real-time test that can be used to accurately predict dissolution test results of a modified release product.

Download
Real-Time Prediction of Polymer-Coated Multiparticulate Dissolution using PAT
Authors: Piyush PatelA, Edward GodekB, Chris O’CallaghanC, Dr. Ian JonesD A Colorcon, PA, USA B Glatt Air Techniques, NJ, USA C Innopharma Technology, Dublin, Ireland D Innopharma College of Applied Sciences, Dublin, Ireland
Real-Time Prediction of Polymer-Coated M
Adobe Acrobat Document 1.2 MB